Lacquer Sanding Machine

Introduction:

1.It is applied for the lacquer sanding job like furniture, floor, finger joint board, plate, craft products and etc.

2.Sanding shifts are casting, have good effect of vibration absorption to guarantee running smooth.

3.Variable speed adjustment by Taiwan Delta frequency inverter, variable feeding speed system.

4.Equipped with 300mm diameter sanding rollers with sanding belt self cleaning system, dedusting, cooling, lengthen sanding belt’s life time.

5.Short of pressure, sanding belt breakage or drifting of sanding belt, the machine will stop itself, worktable will fall down automatically, ensure safe.

6.The electrical components are Schneider or Siemens.

Technical Parameters:

Model KLS1300R-R

Sanding width 40-1300mm

Sanding thickness 3-110mm

Min. Sanding length 380mm

1st sanding roller speed 2-12m/s (Frequency control)

2nd sanding roller speed 2-12m/s (Frequency control)

Feeding speed 6-30m/min

Size of abrasive belt 1330*2200mm

Sanding roller diameter Ø300/300mm

Total power 30.79kw

Sanding motor power 15/11kw

Conveyor motor power 4kw

Lifting motor power 0.37kw

Brush roll motor 0.37kw

Blower motor power 0.025kw*2pcs

Air pressure 0.55Mpa

Consumption of compressed air 1.5m³/min

Dust collection air volume 9500m3/h

Dust collection air speed 25-30m/s

Overall size 2200*2100*2200mm

Net weight 3500kgs